All
Product keywords
Please enter the email address account
Ortur Laser Master 7W Desktop Laser Engraver Laser Engraving Machine 32-bit Motherboard LaserGRBL Control Software Easy to Install
Share to:

Ortur Laser Master 7W Desktop Laser Engraver Laser Engraving Machine 32-bit Motherboard LaserGRBL Control Software Easy to Install

- Black EU Plug 7W
461223402

32-bit Motherboard with STM32 chip for Faster Speed and Higher Precision. Multiple Safety Protection Making You Safe to Operate
4.79 30 Customer Reviews
149.99 $172.91 13% OFF
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Jan 30 - Feb 07, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance
Recommended for You
Customers also shopped for

Ortur Laser Master 7W Youtube Video Reviews

Ortur Laser Master 7W Descriptions

Fast and Precise Engraving
Ortur Laser Master is a portable laser engraving machine, which is easy to install and safe to operate. It has a built-in sensor accelerometer. When the machine tilts, it will automatically stop laser work and protect against laser damage. Support for GRBL open source software for operating fun. It supports dynamic control laser module, and PWM power regulation, low brightness regulation, laser temperature induction protection. It also supports lasers of different powers, so that this is a great device for DIY project.

Main Features
- 32-bit Motherboard with STM32 chip, more powerful, faster, higher precision. Easy to adjust the speed (0-3,000mm/min) and power (S0-S1,000) for both of engraving and cutting.
- Active position protection, there is a G-sensor on the motherboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop.
- Laser beam safety guard, if your computer system halted, led to that the laser engraver stop moving, the laser beam will stop.
- Exposure limitation, after the laser beam is turned on, but there is no movement for a long time, it will automatically stop. Weak Light Mode: the laser beam automatically stops after 100 seconds. None Weak Light Mode: based on the power level, the laser beam automatically stops within 10 to 60 seconds.
- LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the laser engraver via LaserGRBL for engraving and cutting.
- This laser engraver supports PWM mode.
- Pre-assembled parts, just need 5-10 minutes to install the machine.
- 160 x 150 mm engraving area.
- Aluminum profile + acrylic materials machine body.

Specifications
Image format: NC, DXF, BMP, JPG, PNG
Operating system: Win XP, Win 7, Win 8, Win 10
Image size: 2000 x 2000 pixels / 0.075mm dot pitch
Power adapter output voltage: 12V
7W carving: wood, bamboo, cardboard, plastic, leather, PCB, aluminum oxide, paint finish metal.
LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Mac OS, and Linux. It's the most popular paid carving software in the world, very easy to use.

Note:
1.Please wear protective glasses when operating the machine.
2.Please do not touch the laser emitter with your hand, or it may burn your hand.
3.Please avoid strong impact on the machine.
4.Children under 14 are not allowed to use this product and children over 14 need adult supervision.
5.The light engraving machine cannot be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
6.This product is not recommended for industrial cutting due to its high engraving speed.

Click here to download the manual

Specification

General

Brand: Ortur
Model Number: Laser Master 7W
Type: Laser Engraving Machine
Material: Aluminum + Acrylic
Laser Wavelength(nm): 440nw-450nw
Laser Power: Electrical Power: 7W, Luminous Power: 1200 - 1600 mw
Laser Reaching Range: 160 * 150mm
Power By: Power Adapter 12v 3A

Dimensions and Weight

Product weight: 1.5000 kg
Package weight: 2.3500 kg
Product size (L x W x H): 38.70 x 27.20 x 13.30 cm / 15.24 x 10.71 x 5.24 inches
Package size (L x W x H): 44.00 x 26.00 x 12.00 cm / 17.32 x 10.24 x 4.72 inches

Package Contents

Package Contents: 1 x Acrylic Plate for Testing, 4 x Wooden Plates for Testing, 1 x Wrench, 6 x Cable Ties, 1 x Power Adapter, 4 x Angle Fasteners, 1 x Whiteboard Marker, 1 x Brush, 4 x M5 Nuts & Washers, 2 x M3x16 Screws & 5MM Plastic Columns
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W
Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W

Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W

Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W


Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W




Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W

Ortur Laser Master 7W Personal Laser Engraving Machine- Black EU Plug 7W

Suggested Products

Customer Reviews

4.79 out of 5
  • 24
  • 6
  • 0
  • 0
  • 0
See all 30 reviews Write a Review
  • Fog
    First Laser Engraver
    The family decided to chip in and buy the wife, and their mother, a crafting machine for her birthday, since she really enjoys doing various craft projects. And she is really good at it. I had been looking at 3D printers and laser engravers for myself since she got the machine she has (not a 3D printer or laser engraver). We both enjoy her machine, but I wanted the laser engraver to add to the mix. I watched many YouTube video's to decide what I would like to get. I chose the Ortur 15 watt machine offered by Gearbest.com. The reason being is that it is small in size but capable of engraving a large area, and easy to set up and operate. You are not limited by the size of material you can engrave. As long as it will fit under the laser head, you are good to go. If the item is thick or tall, just raise the machine to compensate for it. All of the difficult assembly has already been done, so you only have the minimum to finish. The software download took longer to figure out, but really was not that bad as long as you follow the directions. The desktop footprint is less than all the other comparable machines I checked out, and it is lighter in weight, so this is a plus to me. Since this is my first ever laser engraver, I have much to learn as far as machine settings and what it is capable of doing. To say I am impressed is an understatement. Do I like it? YES. It is easy to use and I am enjoying it very much.
    The safety glasses sent with the machine are satisfactory, but there are better ones out there, so I purchased two sets that are much better.
    Since the machine is not enclosed in it's own cabinet, you have to make sure anyone around you is using the proper eye wear, and be sure to keep pets where they cannot get their eyes damaged. Working in a well ventilated area is a must since the machine doesn't have an exhaust system for the smoke.

    Even though the precautions I mentioned may seem less than favorable, they are really common sense. The fact that I can easily pick up the machine and take it anywhere I want to do projects without having the need for a large area to work is a plus to me.

    I have only done a few things with it so far, but I am looking forward to more things to try out.

    Attached are a few photo's of my first projects. Photo #1, first project. Photo #2, 4th project, on leather. Photo #3, next to the Ortur 15w. Photo #4, close up of project #4

    Jan 10,2020

  • eddy66
    Graveur de bonne qualité
    Objet reçu très rapidement, commandé le 22.12.2019 et reçu le 04/01/2020.
    Le vendeur a rajouté gratuitement le plug US/EU sans que je le lui demande, MERCI beaucoup !
    Assemblage en 5 min , connexion facile au PC , premiers essais très concluants ,
    le laser semble assez puissant , il faut fouiller un peu sur le net pour trouver
    certaines informations comme par exemple pour rajouter les boutons au logiciel laserGRBL , mais rien d'insurmontable
    Ce premier graveur laser devrait me permettre de me faire la main et voir ensuite au dessus éventuellement.
    Merci !

    Jan 05,2020

  • SlowBurn
    Ortur Laser Master
    This is my 1st laser cutter/engraver and my 1st purchase from Gearbest.
    Ive been playing with it now for about 3hrs.
    Took a little time to get use to the software but the instruction referance table provided helped with the laser settings.
    Im well amazed with this product.
    Full tracked from USA to UK and very fast delivery time.
    Easy to setup.
    Thanks Gearbest. :-)

    P.S. It would have been nice to have the software in the box too but it was not too hard to find it useing the instruction manual.

    Dec 21,2019

  • Elmar
    Super Lasergravierer
    Einfacher Zusammenbau und sehr gut verpackt.
    Als Tipp im Betrieb, der Laser hat einen Kippsensor der bei minimaler Schräglage den Laserstrahl ausschaltet, jedoch nicht die Armbewegungen. Wenn ihr also lasert und seltsame Gravierfehler oder Schnittfehler habt. Montiert den Laser fest auf ein Brett und stellt ihn absolut gerade auf.
    Sonst ein Top Gerät und absolut empfehlenswert.

    Jan 10,2020

  • Laur
    Great product
    This is my first laser engraver and so far very pleased with it. Engraves easily plastic and also cuts foam inserts for toolboxes. Software is pretty straight forward to use and overall no issues at all.

    Shipping was fast and item was well packed.

    Dec 27,2019

FAQ for Ortur Laser Master 7W

  • How long will it take to assemble the Ortur Laser Master 15W?

    It will take about 10 minutes to assemble.
  • Which engraving software does the Ortur Laser Master 15W support? How do I download it?

    LaserGRBL software is supported. Download link: https://www.dropbox.com/s/oedktxq14f0ggr7/LaserGBL.zip?dl=0
  • Which materials can be sculpted by Ortur Laser Master 15W?

    Mainly wood, plastic (opaque), cloth, leather, sprayed metal, alumina, etc.
  • Can Ortur Laser Master 15W engrave metal and stainless steel?

    It can carve sprayed metal, alumina, can not carve stainless steel (after blackening, adjust the focus, can leave a little trace, but the effect is not ideal).
  • What is the maximum cutting thickness of the Ortur Laser Master 15W?

    Plywood (plywood) with thickness of 3mm has been tried at present.
  • What is the engraving size of Ortur Laser Master 15W?

    Engraving size: 150mm × 160mm.
  • How many hours can the Ortur Laser Master 15W work continuously?

    24 hours (in a well-ventilated and heat-dissipating environment).
  • Which operating systems are applicable to the Ortur Laser Master 15W?

    Windows xp,Windows 7,Windows 8,Windows 10.
  • What types of files can be read by Ortur Laser Master 15W?

    NC, DXF, BMP, JPG, PNG,and still pictures in other formats.
  • Can I replace a 7W laser module with a 15W module?

    Yes.
  • How long will it take to deliver the goods after the order is placed?

    The goods will be delivered as soon as possible after the order is placed, and the specific delivery time is subject to the display on the front page.
  • Can I carve a cylindrical surface?

    At present, it is not supported, it is necessary to develop a specific roller seat to match.
  • Why do I have to use goggles?

    If you watch laser carving without goggles, it will cause eye discomfort. Moreover, in the event of an accident, causing the laser to enter the pupil, it will cause irreparable damage to blindness.
  • Why the laser engraving machine must have active position protection?

    In the process of actual operation of the engraving machine, there is the possibility of carelessly hitting the laser engraving machine and artificially overturning the laser engraving machine. If there is no anti-impact protection function, the laser may cause damage to the human body or property. With the function of anti-impact protection, the occurrence of laser shooting out of the target can be effectively avoided.
  • Why the laser engraving machine must have the Laser Beam Safety Guard?

    In the process of actual operation of the engraving machine, there is the possibility that the computer system crashes and causes the engraving machine to get stuck and burn the target continuously. The Laser Beam Safety Guard can effectively avoid this situation. when the laser head does not move in the light state, the Laser Beam Safety Guard will stop the laser head from coming out.
  • Why is the carving or cutting effect of some materials not good?

    Different materials, depending on the ignition point, reflectivity, light transmittance are different, the carving / cutting effect will be completely different. All materials with high reflection and high light transmittance are prohibited from being carved or cut directly. Moreover, even if it is the same material, the darker the color and the higher the absorbance, the better the carving / cutting effect will be.
  • Can metals such as copper, iron and aluminum be carved?

    The mirror surface of copper, iron and aluminum which are not attached to the coating cannot be carved directly, especially copper metal, whose reflectivity is so high that the direct carving laser will even be reflected back to the lens, causing the laser head to burn out. At present, in some videos, the copper is carved, generally other materials are electroplated with copper, or there is a coating attached to the copper surface, and the laser works on the coating. Carving of iron and aluminum will only be effective if it is blackened or coated.
  • Is there a time limit for a single carving or cutting?

    If the laser module with good heat dissipation conditions can achieve the heat balance of the LD light source, there will be no theoretical limit on the time of carving/cutting.
  • What is the function of the two buttons on the machine?

    The big button is the power key. press 0.5 seconds to turn on the computer and 2 seconds to turn it off. The small button is the reset button, which will be reset when you press the engraving machine, and the laser head will return to zero.
  • The motor stutter XY shaft is not running smoothly, or the limit switch is not working, what may be the cause?

    Please check the port of the motor cable. it may be that the motor cable is loose. Please check the limit switch line. the wire on the limit switch can be plugged and unplugged from the limit switch. it may be that the wire of the limit switch is loose.
  • What is the reason why the USB cable is plugged into the computer, but the computer can't recognize it?

    Without the corresponding drivers installed, Windows XP/7 and Windows 8 take 10, as well as 64-bit and 86-bit systems, need to install different drivers respectively.
  • What is the function of the LED indicator on the machine?

    The red light is the power indicator. Always on means to start the system, and off means to turn it off. Fast flicker indicates that the power key is pressed, and slow flicker indicates that the machine is in the alarm state and needs to be unlocked. The blue light is a USB status indicator, which always indicates that the USB cable is connected to the computer and is recognized. When off, the USB cable is not connected or the computer does not have a driver installed, and flashing indicates that engraving data is being transmitted.
  • Why do some materials need to be coated or blackened before they can be carved?

    Coating or blackening is generally an auxiliary carving measure for transparent or highly reflective materials to ensure that the laser can be absorbed by the target and produce an engraving effect.
  • Why does the laser head suddenly stop emitting light during the carving process?

    Generally, the active position protection is activated, because the return movement of the laser head in the high-speed engraving process has a great braking inertia, which may drive the whole engraving machine to move, resulting in the anti-impact protection function to be triggered. The solution is to place the engraving machine on a flat and stable table, preferably with a randomly attached angle iron.
  • View More

Customer Questions

  • All(12)
  • Product Information(10)
  • Stock Status
  • Payment
  • About Shipping
  • Others(2)
Q

Can this one cut acrylic?

By Jacqlyn Oshman Jan-18/2020 03:10:16

A
Sorry, it cannot cut acrylic, could only engraver on acrylic.
Q

Hiya. Is this one powerful enough to enrgave a name on alluminium piece? If not, with what parameters should i begin with to find the one that will be?

By judas Jan-14/2020 10:11:18

A
The heat dissipation coefficient of aluminum is too high. Pure aluminum cannot be engraved directly.
Q

Will the Ortur Laser Master 15w engrave on glasses? what kind of laser is this and what is the life span of this laser?

By Nasumudheen Jan-14/2020 02:13:42

A
Hi!Is it glass? Need to blacken the glass and then sculptThis laser is an LD laser (LD Laser, not CO2) with a lifetime of 8,000 hours
Q

Will the Ortur Laser Master 15W cut through 3mm (.125) wood such as walnut and/or cherry? If it will not, do you have a recommendation?

By Jeff Jan-10/2020 03:09:53

A
The Ortur Laser Master 15W, the electrical power is 15W, and the luminous power is about 4.5W.We have only tested the cork wood and plywood, it could run 2-3 rounds to cut through.But on Walnut or Cherry, sorry but we hadn't tested it yet, but i think it would be a little hard to cut the hardwood, it may need to run more rounds, but the edge of the upside may be carbonized badly.
Q

Hello, which laser modules are compatible with this and where can they be found on Gearbest?

By Patrick Jan-09/2020 11:53:18

A
Compatible is :Ortur Laser Unit 7W (LU7W)Ortur Laser Unit 15W (LU15W)Ortur Laser Unit 20W (LU20W)
Q

is there laser module with this pack ?

By rafik Dec-19/2019 04:03:40

A
Hello rafik, Package Contents: 1 x Acrylic Plate for Testing, 4 x Wooden Plates for Testing, 1 x Wrench, 6 x Cable Ties, 1 x Power Adapter, 4 x Angle Fasteners, 1 x Whiteboard Marker, 1 x Brush, 4 x M5 Nuts & Washers, 2 x M3x16 Screws and 5MM Plastic Columns    
Q

What is average time of lifetime of a laser module ? 15W and 7W ??? Thanks

By Philip Dec-18/2019 18:00:42

A
Hello Philip,If you use it in good condition, both of 15W and 7W laser modules could work for about 8,000 hoursThank you for your understanding.
Q

The laser is included? Thanks

By Marco Dec-17/2019 21:06:59

A
Hello Marco, Package Contents: 1 x Acrylic Plate for Testing, 4 x Wooden Plates for Testing, 1 x Wrench, 6 x Cable Ties, 1 x Power Adapter, 4 x Angle Fasteners, 1 x Whiteboard Marker, 1 x Brush, 4 x M5 Nuts & Washers, 2 x M3x16 Screws and 5MM Plastic Columns    
Q

does the 7W carve pcb or is it just the 15W

By martin leybourne Dec-17/2019 16:39:56

A
Hello martin, https://www.youtube.com/watch?v=RWpkRleZw_k&t=18sPlease watch this video for your reference, the Ortur Laser Master 15W cut 3MM cork wood.By the way, our 15 Watt is the electronical power, and the luminous power is about 4.5Watt.
Q

Does this price of $175.99 include full engraving machine and laser module ? Or laser module should be bought separately ?

By Philip Dec-17/2019 15:29:48

A
Hello Philip, Package Contents: 1 x Acrylic Plate for Testing, 4 x Wooden Plates for Testing, 1 x Wrench, 6 x Cable Ties, 1 x Power Adapter, 4 x Angle Fasteners, 1 x Whiteboard Marker, 1 x Brush, 4 x M5 Nuts & Washers, 2 x M3x16 Screws and 5MM Plastic Columns    

12 Questions & Answers View All

Sponsored Products Related to This Item

Shipping

There are two key factors which will affect the time you receive your items.

1
Item processing time
After receiving your order,we require some time to test the product to ensure its quality.The exact processing time varies depending on the item.The average processing time is 3 working days.but this can also be affected by the item's stock status. For small quantity orders,the processing time is 1-3days while larger quantity orders may require 2-5days.
2
Shipping methods
China Warehouse:
Shipping Type Country or Region Arrive within 1-7 Days Arrive within 8-15 Days Arrive within 16-30 Days Arrive within 31-45 Days Average Time (Days)
Unregistered Air Mail or Registered Air Mail United States 0.52% 44.87% 49.88% 3.5% 18.13
Spain, United Kingdom, Italy, Germany, France & Portugal 5.18% 43.44% 48.34% 1.17% 15
Netherlands, Greece, Poland, Hungary, Slovakia, Czech Republic 2.96% 40.34% 52.54% 3.74% 18.66
Russia 0% 4.45% 84.41% 11.1% 28
Japan, Korea 0% 21.30% 68.80% 9.66% 17.75
Brazil 0% 0% 23.91% 72.09% 38.6
Turkey 0% 37.75% 59.05% 3.1% 20.33
Thailand, Singapore & Malaysia 0% 40.39% 56.12% 2.6% 16.2
Other countries 0.7% 38.79% 47.94% 8.56% 23.57
Priority Line United States 12.28% 79.05% 7.4% 0.52% 11.75
Spain, United Kingdom, Italy, Germany, France & Portugal 8.44% 66.56% 23.45% 0.45% 13.55
Russia 0% 3.48% 75.79% 20.04% 31
Brazil 2.21% 6% 61.29% 25.46% 30
Turkey 20.42% 77% 3% 0.08% 10
Australia 7.67% 86.60% 5.68% 0% 11
Korea 97.54% 1.57% 0.89% 0% 7
Japan 95.80% 2.09% 0% 0% 6.84
Thailand, Singapore & Malaysia 58.96% 41.04% 0% 0% 8.45
Other countries 22.33% 30.8% 27.62% 17.64% 18.65
Expedited Shipping ALL countries(EMS) 3.8% 46.8% 26% 15% 14.8
ALL countries(DHL) 65.8% 25.75% 3.86% 0.37% 6.72
GW Warehouse: Typically 3-5 days to the UK, 3-7 days to other European countries.
USA Warehouse: Generally, 3-7 days to a USA address.
ES Warehouse: Generally, 2-5 days to the Spain, 3-7 days to the Portugal.
Shipping from warehouse nearest to shipping address is faster. Additional charges may apply.
Note: This is a general guide and delays maybe caused force majeure, natural disasters, inclement weather, war, public holidays, and factors outside our control. Generally speaking, we offer free shipping for Ortur Laser Master 7W to United States (US, USA), United Kingdom (UK, GB), Germany, Italy, France, Spain, Portugal, Poland, Brazil, Russia, Japan, Greece, Austria, Hungary, Slovakia, Czech Republic, Ireland, Lithuania, Israel, Denmark, Norway, Sweden, Canada, Australia, Netherlands, Korea, Turkey, Mexico, Ukraine, Romania, Columbia, Thailand, Singapore, Malaysia etc. Please choose the shipping methods for the final price.

Payment

Gearbest.com accepts PayPal,Credit Cards,Wire Transfer,Westem Union, YandexMoney,Webmoney,Boleto,OXXO and BKM as secure payment methods.

1
Paypal
The most convenient payment method in the world.
2
Wire transfer
For orders which exceed $1,500,please contact us at support@gearbest.com.
Note: please email us the order number,the amount transferred along with currency type,and the exact date of the wire transfer.
3
Western Union
Please contact us at support@gearbest.com for details.
Note: please email us the following information after you have paid via Westem Union:
· Control Number(10 digits)
· The exact amount sent along with the currency
· Name of sender.
· Address of sender
4
YandexMoney、 Webmoney
With YandexMoney and Webmoney, it is convenient and safe for you to pay via credit card、wallet or cash
5
Boleto
For Brazil customers, we accept Boleto: you only need to fill in the payment information, remember your Boleto Voucher information and pay it within 3 days at any Boleto stores.
6
OXXO
For Mexico customers, we accept OXXO: you can choose OXXO payment on our website, and then remember your OXXO Voucher information and pay it within 3 days at any OXXO stores.

Do you want to bulk buy Ortur Laser Master 7W ? Please submit your wholesale Ortur Laser Master 7W inquiry below. Please note we usually don’t offer free shipping on wholesale Ortur Laser Master 7W orders, but the wholesale price will be a big bargain.

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service