FULL SPEED F3 2S Flight Tower with OSD 20 x 20 Mounting Hole 20A ESC Support Dshot600
Share to:

FULL SPEED F3 2S Flight Tower with OSD 20 x 20 Mounting Hole 20A ESC Support Dshot600

- BLACK 1PC 236758501

31.16 $36.04 Discount : 14% OFF
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Jan 28 - Jan 30, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report item

Recommended Products for You

Customers Who Bought This Item Also Bought

Item name: Mini F3 2S Flight Tower
Mini F3 2S flight control board:
Product size: 27 x 27 x 16mm
Mounting hole: 20 x 20mm
Mounting hole diameter: 2mm
Product weight: 3.1g
Processor: STM32
Sensor: MPU6000 ( connected by SPI )
Firmware version: BetaFlight 3.1.0 OMNIBUS
Built-in ESC: 5V 1A
Receiver: PPM, Spektrum 1024 / 2048, SBUS, XBUS, SumD SumH RX etc.
Power supply: 2 - 4S LiPo battery

-Support programmable LED Spirit ( turn off transponder before using )
-Support BLHeli suite
-Support the newest Dshot ESC
-Built-in voltage detection, alarm
-Built-in OSD
-Buzzer solder pin
-LED-STRIP connector
-BB ring

Mini F3 2S ESC board:
Size: 27 x 27 x 5mm
Mount hole: 20 x 20mm
Firmware version: BLHeli-S 16.5
Lipo battery: 2 - 4S
Con. current: 20A
Peak current: 25A ( 10S )
Programming: yes
BetaFlight passthrough ready
Dshot600 ready ( Default )
Support Dshot600
Damped light on



Type: Brushless,ESC,Flight Controller

Flight Controller

Flight Controller Type: F3

Electronic Speed Controller

Firmware: BLHeli-S
Functions: DShot600
Continuous Current: 20A
Burst Current: 25A
Input Voltage: 2 - 4S

Dimension and Weight

Product weight: 0.0087 kg
Package weight: 0.0100 kg
Product size (L x W x H): 0.27 x 0.27 x 0.16 cm / 0.11 x 0.11 x 0.06 inches
Package size (L x W x H): 13.00 x 7.00 x 1.00 cm / 5.12 x 2.76 x 0.39 inches

Package Contents

Package Contents: 1 x Flight Controller, 1 x ESC, 8 x Nylon Column, 4 x M2 Nylon Nut, 1 x 6Pin Flexible Flat Cable, 2 x Wire

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.

Guess you like

Customer Reviews

4.62 out of 5
  • 17
  • 2
  • 1
  • 0
  • 1
See all 21 reviews Write a Review
  • Victor Dominguez
    Best value 20x20 stack period!
    This is the same stack used in the leader 120 and that quad is freaking awesome (I own one) I was so impressed I wanted to base another build off its design so I picked this on sale for only 25 bucks! There is literally no other fight controller + 20a 4in1esc combo anywhere that you can find at a price like that. As far as the setup goes its super easy to wire up and the diagrams are posted here on the site to help w/ breaking things down and with some good 1104s on this thing its a beast.
    There is nothing negative to say about this combo. Its a freaking amazing deal

    Mar 17,2018

  • Abhishek
    FULL SPEED F3 2S Flight Tower with OSD
    I bought this stack for a 2" build. Flashed the F3 board with latest betaflight firmware and it has been working fine. Haven't testest the 4 in esc board but the quality of board looks good. Bought it during the sale so the price is unbeatable for a 20x20 stack with a F3 board with OSD and a 20A 4in1 esc board.
    The esc board doesn't come with any marking for motors.

    Feb 24,2018

    FULL SPEED F3 2S Flight Tower
    A good set of flight controller with ESC. The action managed to take about $ 24 that pleased, the purchase was pleased, thanks to the store and the seller.
    Неплохой комплект полетного контролера с ESC. По акции удалось взять около 24$ что порадовало,покупкой остался доволен, спасибо магазину и продавцу.
    There is no detailed description of the connection.
    The holes are only for m2 screws.
    Нет подробного описания по подключению.
    Отверстия рассчитаны только для m2 винтов.

    Jul 26,2018

  • Jnastyfastime
    My favorite fc stack for buget micro builds
    Price when they go on sale for $25 again i will be
    easy to wire
    20a esc
    works great on 3s don't know why they advertise it as 2s
    I have 4 fullspeed RTF drones and this stack is used in all of them
    I have included some pic's of the builds I have used this setup in
    Had one board where the led sockets quiet working stopped working

    Feb 03,2018

  • Alexander
    Контроллер с характером
    Это интересное сочетание большой мощности регуляторов и маленького размера! Контроллер не самый новый, F3, но его достаточно для основных настроек и использования гоночного квада размером от 90 и до 200мм! )))
    Хорошее качество пайки. В работе пока не проверял. Со скидкой был очень интересен цена/возможности.
    Пока не обнаружил, не проверял

    Jan 07,2018

  • Norbert
    build own drone
    I have Leader 120 drone and tower is OK. That's why I ordered this tower but it was nor original Full Speed it is some other different fornet or something.... I build it and working very well... so no complain.. anyway it was cheap!
    not yet

    Feb 12,2018

  • daive
    Freeshipping でしたが、

    Jan 24,2018

  • JR B
    FULL SPEED F3 2S Flight Tower with OSD 20X20 Mounting Hole 20A ESC Support Dshot600
    Good Tower
    just Needed to set idle % to 6 or 9 in Flight Configurator or it will D sync do that and fly great
    If you are getting this you can set up no worries
    I recommend mine fly's great.
    Set Idle % speed to 6 or 9 in configurator

    Apr 07,2018

  • James
    good but mine was bad quality
    it works very well and my quad flys and flies very well imm pretty supprised by the form fator to onnet your rx you have to turn on serial rxon uart 3 wih took a while to work out
    for some reason some of the ables coneted to the es are cut and.The usb port is terrible mine ripped off just trying to pull out usb plug :-(

    Feb 14,2018

  • Ivan
    Did not last very long
    Very cheap, I got it for 25$ for both ESC and FC, which is the lowest price I ever seen.
    However quality is also very very low.
    USB torn off after third plugging in, and it wasnt a solder problem, it is just the PCB quality, later I tried to solder wires to get access to USB and pads just detached from it, and I used thinest soldering iron and lowest heat that could possibly melt solder. If you ever seen Micro USB soldering pads you would understand why.

    Unfortunately drone flipped out of the sky after 2 minutes of maiden flight! without the USB I am unable to check if ESC is also faulty but thats what I got, not working stack. Im really sad that it takes 2 month to get package, time to wait for a decent wether and then hardware fails for no reason


    May 07,2018

Customer Questions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

0 Questions & Answers View All>

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here