Product keywords
Please enter the email address account
TMC2208 V1.0 Stepper Motor Driver  Tester Module With Stackable Headers Test Or Flash Parameter Modes Of TMC2208 Operation On USB To Serial Adapter Fo
Share to:

TMC2208 V1.0 Stepper Motor Driver Tester Module With Stackable Headers Test Or Flash Parameter Modes Of TMC2208 Operation On USB To Serial Adapter Fo

- White

Save an extra for using the App

Scan the QR code to buy:

  • 1.Download our FREE app on Google play or App Store.
  • 2.Launch the app and scan the QR code to buy directly.

Follow the below steps:

  • 1.Sign in to
  • 2.Add product(s) marked with to your Cart.
  • 3.Open our app, and go to your Cart.
  • 4.Pay for your order for an immediate discount!
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Oct 26 - Nov 07, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Recommended for You


Main Features


With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.

The adapter comes with stackable headers, so you can use it direct on your 3D printer board
The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).   
With the TMC2208 Configurator you can change the settings and program the OTP (One-Time-Programmable) memory of a Trinamic TMC2208 via the UART interface.

Hardware compatible with StepStick and Pololu A4988
Drive capability up to 1.2A (RMS) continuous coil current - 2A Peak
Step/Dir interface with microstep interpolation (up to 256 microsteps)
Configuration via CFG pins or UART interface
Motor supply voltage: 5.5...36V
Logic supply voltage: 3.3...5V
Components on the bottom for better heat dissipation
stealthChop2 - for quiet operation and smooth motion (default setting)
spreadCycle - highly dynamic motor control chopper (enableable via UART)

To run the program:

-Install ScriptCommunicator
-Download TMC2208.scez
-Start the TMC2208.scez file with the ScriptCommunicator: ScriptCommunicator TMC2208.scez
-Choose the right serial port and click Connect
-Modifications in the Configurator are directly transmitted

The OTP bits can be programmed only one time.
If you enable spreadCycle then TOFF cannot be 0 (null).

Package Included:

1x Tester module
1x TMC2208 V1.0 Stepper Motor Driver
1x Heatsink
1x USB cable
1x Screwdriver

Hardware Connection

You can use every RS232 serial adapter with 0-5V logic levels (e.g. FTDI-Breakout) and the SilentStepStick Tester/Programmer can be used as connection adapter.

Note: The jumper next to the PDN_UART pin has to be closed on the TMC2208 SilentStepStick to enable the pin access via the pin header.



View More

Suggested Products

Customer Reviews

  • 0
  • 0
  • 0
  • 0
  • 0
See all 0 reviews Write a Review

Get G Points! Be the FIRST to Write a Review!

Sponsored Products Related to This Item
Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service