All
Product keywords
Please enter the email address account
5Pcs Break-away 2x20-pin Strip Dual Male Header for Raspberry Pi Zero GPIO
Share to:

5Pcs Break-away 2x20-pin Strip Dual Male Header for Raspberry Pi Zero GPIO

- Black
236439201

2.47
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Dec 10 - Dec 12, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance

Recommended for You

Customers also shopped for

This 2x20-pin strip male header is a great way to add pins to 2x20 2.54mm holes in a PCB.
Pin Spacing: 2.54mm
Male Header for Raspberry Pi Zero

Specification

Custom

General

Raspberry Pi Type: Accessories,Raspberry Pi,Expansion Board
Mainly Compatible with: Ardunio

Power Batteries

Batteries Included: No

Weight and Size

Product weight: 0.0120 kg
Package weight: 0.0150 kg
Product Size(L x W x H): 5.00 x 2.00 x 0.50 cm / 1.97 x 0.79 x 0.2 inches
Package Size(L x W x H): 7.00 x 9.00 x 0.60 cm / 2.76 x 3.54 x 0.24 inches

Package Contents

Package Contents: 5 x Male Header

5Pcs Break-away 2x20-pin Strip Dual Male Header for Raspberry Pi Zero GPIO- Black

Suggested Products

Customer Reviews

5 out of 5
  • 1
  • 0
  • 0
  • 0
  • 0
See all 1 reviews Write a Review
  • Marco
    Yes (0) Color: Black
    Buoni
    Connettori buoni e contatti ottimi
    Suggestion
    Nulla

    Mar 20,2018

FAQ for 5Pcs Break-away 2x20-pin Strip Dual Male Header for Raspberry Pi Zero GPIO

  • I've plugged my Raspberry Pi in, but nothing is appearing on the screen. What's wrong?

    It is important that you connect your cables in the correct order, ensuring that the HDMI cable is plugged in before the power.
  • Only the red light on my Pi is on! Is it broken?

    1. Check that your SD card is inserted correctly into your Raspberry Pi.

    2. Check that your SD card contains the software required for the Raspberry Pi to boot.

  • Do I need another computer to use a Raspberry Pi?

    You don't need another computer to use a Raspberry Pi, as it's a computer in its own right. However, when you need to create new micro SD cards, you might need occasional access to another computer.
  • I've copied NOOBS to an SD card, but it gets stuck on the splash screen. What should I do?

    If NOOBS won't load once you have copied the files over, it may be that you have a corrupt SD card. If you've tried a different SD card and NOOBS still doesn't work, then you might want to try installing Raspbian directly.
  • I have a Raspberry Pi 3. Do I need a special power supply?

    For most uses, the original official power supply will be fine.
  • Why Raspberry Pi boot sequence failures?

    Unlike a PC, the Raspberry Pi does not have a BIOS, so without a working software image, it is stone-cold-dead. Without a working OS, and if the power supply works, the only thing guaranteed to happen is that the red power LED turns on. If an image at least starts to boot, then looking at the status LEDs and the HDMI monitor can provide some indication of where the boot process failed.
  • Rainbow screen, what can i do?

    The rainbow flash screen should only appear for about a second (good). If the boot process halts with the rainbow screen on the monitor (bad), there may be a power supply issue, or a kernel software problem.
  • Bad or missing SD card, what is the problem?

    Using a Raspberry Pi 2 as an example, if there is no activity on the monitor and if the red and green status LEDs stay lit and un-blinking after power up, the SD card may not be fully inserted, not detected properly, not flashed or not formatted correctly.
  • No WiFi networks found during discovery scan?

    The activity LED on the WiFi dongle provides minimal indication of WiFi activity. If No WiFi networks are found, and it is flashing normally, there is no WiFi reception. If not flashing at all, the power requirements of the WiFi dongle may be over 150 mA, too high for a Pi USB port, or over 300 mA on a Pi B+, 2, and later versions (unlikely).
  • Why local WiFi network not found?

    It may take one or two minutes to find all available WiFi networks. If the local network does not appear in the list, the WiFi portion of the local router may be down or disabled, reception may be bad, or the router may not be responding to WiFi discovery.
  • Can this item be shipped to my country?

    We can deliver orders to most countries. For a detailed explanation of each shipping method, destination and approximate delivery time, please check our posts:

    GearBest shipping methods

    20 things you need to know when shopping on GearBest

    Short guide on tracking fees and shipping insurance on GearBest

    GearBest shipping memo: save money on delivery by choosing the best option

  • View More

Customer Q&A

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

0 Questions & Answers View All

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service