All
Product keywords
Please enter the email address account
SupTronics X400 Expansion Board
Share to:

SupTronics X400 Expansion Board

- Black
140548501

for Raspberry Pi 2 Model B B+
50.64
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Oct 27 - Oct 29, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance
Recommended for You

Descriptions

SupTronics X400 Expansion Board with IR Receiver for Raspberry Pi 2 Model B / B+

Specification

General

Brand: SupTronics
Model: X400
Raspberry Pi Type: Expansion Board

Weight and Size

Product weight: 0.1150 kg
Package weight: 0.1650 kg
Product Size(L x W x H): 10.00 x 5.50 x 5.00 cm / 3.94 x 2.17 x 1.97 inches
Package Size(L x W x H): 15.00 x 10.00 x 7.00 cm / 5.91 x 3.94 x 2.76 inches

Package Contents

Package Contents: 1 x Expansion Board, 8 x Plastic Screw, 4 x Stud, 2 x Jumping Cap

Suggested Products

Customer Reviews

5 out of 5
  • 22
  • 0
  • 0
  • 0
  • 0
See all 22 reviews Write a Review
  • dion
    Yes (1) Color: Black
    Best digital AMP DAC+ sound card for a Raspberry Pi
    - (US) Highly recommended. High quality digital sound DAC+ RCA AMP. Thanks to Gearbest the delivery was very fast.
    This Card has a IR Receiver, RCA Output, Phone jack 3.5mm and AMP 2x20W. The Suptronics Card works very well with RuneAudio/ Volumio on a RP2/3 and is fully compatible.

    - (DE) Kann ich nur empfehlen, der Versand war dank Gerbest sehr schnell. Diese Karte hat einen eingebauten Verstärker (AMP 2x20W), einen RCA-Ausgang als auch einen 3.5mm Ausgang mit Drehregler. Ein IR-Empfänger ist ebenfalls integriert. Sie funktioniert auf einem RP2/3 mit RuneAudio und Volumio sehr gut und wird als HiFiBerry DCA+ RCA erkannt. Das mitgelieferte Gehäuse ist ok.

    - (PL) jestem bardzo zadowolony. Otrzymałem Produkt bardzo szybko. Karta dźwiękowa Suptronics X400 DAC+ RCA ma wybudowany IR-Receiver, DAC+, wzmacniacz (2x20W) i działa na RP2/3 z RuneAudio oraz Volumio bez Problemu. Wbudowane wysokiej jakości złącze RCA, 3.5mm oraz AMP (2x20W). Polecam
    Suggestion
    - none
    - keine
    - niema

    Jun 09,2016

  • Arnaud G-D
    Yes (4) Color: Black
    M.
    The board is impressive : quite simple to configure (following Suptronics' website howto), it works perfectly with Max2Play and delivers surprisingly good sound quality (for the low price) !
    The 2x20W power is largely enough at 50% volume to stream music in a 20m2 room. Over 50% it's too loud ;-)

    La carte est impressionnante : facile à configurer en suivant le tutoriel sur le site du constructeur; elle fonctionne sans problème avec Max2Play et restitue un son d'une qualité surprenante (pour le prix) !
    La sortie de 2x20W est tout à fait suffisante pour diffuser dans une pièce de 20m2 à 50% de volume. Au-delà de 50%, c'est limite trop fort ;-)

    Pro :
    - Prix / Price
    - Qualité sonore / Sound quality
    - Les entretoises fournies / Spacers provided
    - Facile à mettre en place / Easy to install
    Suggestion
    - Pas de notice / no manual
    - Pas de mousse de protection dans la boite / Board has no foam protection in the box

    Jan 17,2017

  • MiTo55
    Yes (0) Color: Black
    very good product
    After some months of testing, I can say it is very efficient product. Used with Volumio2 (Raspberry Pi3 B+). Can be replaced with analog DAC+, power amplifier D-class and PSU for RPI, but you should get in difficulties with grounding loops. Only one X400 Expansion Board is solving all issues. So the input power (wide range of voltage) is splitting 5V for RPI3 (which is very sensitive on precise PSU). Only one suggestion I have. Would be fine to provide higher level Expansion Board version with 3-pins input for any rotary control of volume. The volume control potentiometer is on not very convenient position with cinch (RCA) connectors. I am really satisfied.

    Nov 08,2018

  • david
    Yes (1) Color: Black
    Supstronics X400 Expansion Board
    Quand on ne connait pas on est sceptique et pourtant à l'utilisation c'est une agréable surprise.
    Fonctionne très bien avec de petites enceintes mais aussi des grosses... le seul critère à respecter étant le diamètre des fils d'enceintes.
    Après divers essai il s'est avéré que la section était déterminante dans la puissance restituée.
    Je compte bien en reprendre un autre car pour écouter de la musique au quotidien c'est très bien et quelles économies que ce soit sur son tarif ou sa consommation !
    Suggestion
    Produit conforme à la description et fonctionne parfaitement bien.
    Idéal comme mini ampli et possible pour de multiples usages.
    Commande bien reçue, bien emballée et rapide

    Feb 09,2016

  • Andrea
    Yes (0) Color: Black
    Surprising
    Definitively a good amp. I tried it hooked up to my Topping TP-60 through the line out and with some low quality speakers driven on the terminals.
    Very good (loud) volume output on the speaker amplifier.
    Compared to my Fiio E10, lower background noise when silent.
    Suggestion
    Does not work with any OS like I had originally though. I really hoped I could have had a Kodi OS with great quality audio output.

    Apr 25,2016

FAQ for SupTronics X400 Expansion Board

  • I've plugged my Raspberry Pi in, but nothing is appearing on the screen. What's wrong?

    It is important that you connect your cables in the correct order, ensuring that the HDMI cable is plugged in before the power.
  • Only the red light on my Pi is on! Is it broken?

    1. Check that your SD card is inserted correctly into your Raspberry Pi.

    2. Check that your SD card contains the software required for the Raspberry Pi to boot.

  • Do I need another computer to use a Raspberry Pi?

    You don't need another computer to use a Raspberry Pi, as it's a computer in its own right. However, when you need to create new micro SD cards, you might need occasional access to another computer.
  • I've copied NOOBS to an SD card, but it gets stuck on the splash screen. What should I do?

    If NOOBS won't load once you have copied the files over, it may be that you have a corrupt SD card. If you've tried a different SD card and NOOBS still doesn't work, then you might want to try installing Raspbian directly.
  • I have a Raspberry Pi 3. Do I need a special power supply?

    For most uses, the original official power supply will be fine.
  • Why Raspberry Pi boot sequence failures?

    Unlike a PC, the Raspberry Pi does not have a BIOS, so without a working software image, it is stone-cold-dead. Without a working OS, and if the power supply works, the only thing guaranteed to happen is that the red power LED turns on. If an image at least starts to boot, then looking at the status LEDs and the HDMI monitor can provide some indication of where the boot process failed.
  • Rainbow screen, what can i do?

    The rainbow flash screen should only appear for about a second (good). If the boot process halts with the rainbow screen on the monitor (bad), there may be a power supply issue, or a kernel software problem.
  • Bad or missing SD card, what is the problem?

    Using a Raspberry Pi 2 as an example, if there is no activity on the monitor and if the red and green status LEDs stay lit and un-blinking after power up, the SD card may not be fully inserted, not detected properly, not flashed or not formatted correctly.
  • No WiFi networks found during discovery scan?

    The activity LED on the WiFi dongle provides minimal indication of WiFi activity. If No WiFi networks are found, and it is flashing normally, there is no WiFi reception. If not flashing at all, the power requirements of the WiFi dongle may be over 150 mA, too high for a Pi USB port, or over 300 mA on a Pi B+, 2, and later versions (unlikely).
  • Why local WiFi network not found?

    It may take one or two minutes to find all available WiFi networks. If the local network does not appear in the list, the WiFi portion of the local router may be down or disabled, reception may be bad, or the router may not be responding to WiFi discovery.
  • Can this item be shipped to my country?

    We can deliver orders to most countries. For a detailed explanation of each shipping method, destination and approximate delivery time, please check our posts:

    GearBest shipping methods

    20 things you need to know when shopping on GearBest

    Short guide on tracking fees and shipping insurance on GearBest

    GearBest shipping memo: save money on delivery by choosing the best option

  • View More

Customer Questions

  • All(1)
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others(1)
Q

Hello is it works with Raspberry Pi Model 3 B Expansion Module ? http://www.gearbest.com/raspberry-pi/pp_354347.html

By gokhan unal Aug-04/2016 09:00:53

A
Hi,gokhanThanks for your inquiry.It works with Raspberry Pi Model 3 B Expansion Module ? http://www.gearbest.com/raspberry-pi/pp_354347.html 

1 Questions & Answers View All

Sponsored Products Related to This Item

Shipping

There are two key factors which will affect the time you receive your items.

1
Item processing time
After receiving your order,we require some time to test the product to ensure its quality.The exact processing time varies depending on the item.The average processing time is 3 working days.but this can also be affected by the item's stock status. For small quantity orders,the processing time is 1-3days while larger quantity orders may require 2-5days.
2
Shipping methods
China Warehouse:
Shipping Type Country or Region Arrive within 1-7 Days Arrive within 8-15 Days Arrive within 16-30 Days Arrive within 31-45 Days Average Time (Days)
Unregistered Air Mail or Registered Air Mail United States 0.52% 44.87% 49.88% 3.5% 18.13
Spain, United Kingdom, Italy, Germany, France & Portugal 5.18% 43.44% 48.34% 1.17% 15
Netherlands, Greece, Poland, Hungary, Slovakia, Czech Republic 2.96% 40.34% 52.54% 3.74% 18.66
Russia 0% 4.45% 84.41% 11.1% 28
Japan, Korea 0% 21.30% 68.80% 9.66% 17.75
Brazil 0% 0% 23.91% 72.09% 38.6
Turkey 0% 37.75% 59.05% 3.1% 20.33
Thailand, Singapore & Malaysia 0% 40.39% 56.12% 2.6% 16.2
Other countries 0.7% 38.79% 47.94% 8.56% 23.57
Priority Line United States 12.28% 79.05% 7.4% 0.52% 11.75
Spain, United Kingdom, Italy, Germany, France & Portugal 8.44% 66.56% 23.45% 0.45% 13.55
Russia 0% 3.48% 75.79% 20.04% 31
Brazil 2.21% 6% 61.29% 25.46% 30
Turkey 20.42% 77% 3% 0.08% 10
Australia 7.67% 86.60% 5.68% 0% 11
Korea 97.54% 1.57% 0.89% 0% 7
Japan 95.80% 2.09% 0% 0% 6.84
Thailand, Singapore & Malaysia 58.96% 41.04% 0% 0% 8.45
Other countries 22.33% 30.8% 27.62% 17.64% 18.65
Expedited Shipping ALL countries(EMS) 3.8% 46.8% 26% 15% 14.8
ALL countries(DHL) 65.8% 25.75% 3.86% 0.37% 6.72
GW Warehouse: Typically 3-5 days to the UK, 3-7 days to other European countries.
USA Warehouse: Generally, 3-7 days to a USA address.
ES Warehouse: Generally, 2-5 days to the Spain, 3-7 days to the Portugal.
Shipping from warehouse nearest to shipping address is faster. Additional charges may apply.
Note: This is a general guide and delays maybe caused force majeure, natural disasters, inclement weather, war, public holidays, and factors outside our control. Generally speaking, we offer free shipping for SupTronics X400 Expansion Board to United States (US, USA), United Kingdom (UK, GB), Germany, Italy, France, Spain, Portugal, Poland, Brazil, Russia, Japan, Greece, Austria, Hungary, Slovakia, Czech Republic, Ireland, Lithuania, Israel, Denmark, Norway, Sweden, Canada, Australia, Netherlands, Korea, Turkey, Mexico, Ukraine, Romania, Columbia, Thailand, Singapore, Malaysia etc. Please choose the shipping methods for the final price.

Payment

Gearbest.com accepts PayPal,Credit Cards,Wire Transfer,Westem Union, YandexMoney,Webmoney,Boleto,OXXO and BKM as secure payment methods.

1
Paypal
The most convenient payment method in the world.
2
Wire transfer
For orders which exceed $1,500,please contact us at support@gearbest.com.
Note: please email us the order number,the amount transferred along with currency type,and the exact date of the wire transfer.
3
Western Union
Please contact us at support@gearbest.com for details.
Note: please email us the following information after you have paid via Westem Union:
· Control Number(10 digits)
· The exact amount sent along with the currency
· Name of sender.
· Address of sender
4
YandexMoney、 Webmoney
With YandexMoney and Webmoney, it is convenient and safe for you to pay via credit card、wallet or cash
5
Boleto
For Brazil customers, we accept Boleto: you only need to fill in the payment information, remember your Boleto Voucher information and pay it within 3 days at any Boleto stores.
6
OXXO
For Mexico customers, we accept OXXO: you can choose OXXO payment on our website, and then remember your OXXO Voucher information and pay it within 3 days at any OXXO stores.

Do you want to bulk buy ? Please submit your wholesale inquiry below. Please note we usually don’t offer free shipping on wholesale orders, but the wholesale price will be a big bargain.

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service