All
Product keywords
Please enter the email address account
Protective ABS Enclosure Case for Raspberry Pi 3
Share to:

Protective ABS Enclosure Case for Raspberry Pi 3

- Black
189436901

with Heat Sink / Screwdriver
5.53 $6.58 16% OFF
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Oct 27 - Oct 28, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance
Recommended for You

Descriptions


Durable ABS Protective Case for Raspberry Pi 3

Main Features:
● This protective case is designed specifically for Raspberry Pi 3, also fits Pi 2, Pi Model B+
● Easy to use and lightweight
● Access to USB and all ports
● The rubber feet caps have anti-skidding function which prevents raspberry pi case from sliding
● Unique lamp hole designed
● Reserved space for Bluetooth

Specification

General

Type: Protective ABS Enclosure Case
Material: ABS

Weight and Size

Product weight: 0.0410 kg
Package weight: 0.0700 kg
Product Size(L x W x H): 9.30 x 6.50 x 2.80 cm / 3.66 x 2.56 x 1.1 inches
Package Size(L x W x H): 11.00 x 7.50 x 4.00 cm / 4.33 x 2.95 x 1.57 inches

Package Contents

Package Contents: 1 x ABS Case, 1 x Screwdriver, 2 x Heat Sink
ABS Enclosure Case for Raspberry Pi 3 Model B with Heat Sink / Screwdriver- Black
ABS Enclosure Case for Raspberry Pi 3 Model B with Heat Sink / Screwdriver- Black
ABS Enclosure Case for Raspberry Pi 3 Model B with Heat Sink / Screwdriver- Black
ABS Enclosure Case for Raspberry Pi 3 Model B with Heat Sink / Screwdriver- Black
ABS Enclosure Case for Raspberry Pi 3 Model B with Heat Sink / Screwdriver- Black
ABS Enclosure Case for Raspberry Pi 3 Model B with Heat Sink / Screwdriver- Black

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Suggested Products

Customer Reviews

4.89 out of 5
  • 219
  • 28
  • 0
  • 0
  • 0
See all 246 reviews Write a Review
  • Rasp Berry Fan
    Yes (1) Color: Black
    Well processed, great additional content, not fitting perfectly for Raspberry Pi Model 3
    The case looks and feels stable and well processed. While fitting the Raspberry-3 unit inside, I felt it was difficult to fit the cut-out parts to the ports. Even after tightening the screws and finishing assembly, one side of the upper part of the case does not meet the bottom part perfectly. This is not really visible, but is noticeable when picking up the case with the unit. This is the only real downside of the product.
    Afterwards, you are still able to access every single port that the Raspberry provides though, even swapping out microSD-cards does not pose a problem. Bluetooth and WiFi signals are not impaired.
    What stands out in comparison to other similarly priced cases is the included screwdriver and two heat-sinks, which means you can instantly assemble the case around the microcomputer and power it on without worrying about additional required tools or add-ons.
    Shipping only took a little over 2 weeks and did not involve any trouble.
    The case is not 100% perfect, but for the very low price and the included extras I would definitely recommend it.

    Oct 11,2018

  • SPOHR
    Yes (0) Color: Black
    Monsieur
    Bonne finition et très pratique.
    Le Raspberry est bien fixé avec des clips sur le coté. Il n'est pas forcément nécessaire d'utiliser les vis livrées avec.
    Les ouvertures sont étudier afin de pouvoir enlever et remettre le couvercle avec le Rpi en fonctionnement, ce qui n'est pas toujours de cas avec ce type de boitier.
    Je n'ai pas utilisé les petits radiateurs, donc pas d'avis dessus.
    Suggestion
    Le tourne-vis est très cheap.
    Attention, ne faite pas comme moi, bien penser à enlever la carte SD avant d'insérer le Rpi.
    J'ai cassé ma carte SD de cette manière, mais c'est de ma faute.

    Dec 14,2016

  • Nikolay
    Yes (0) Color: Black
    Case for Raspberry
    Корпус отлично подошел к RPi третьей версии. В комплекте шурупы и противоскользящие ножки. Ничего не скрипит. Рекомендую к покупке.
    fits perfect for Raspberry Pi, GPIO Ports are left out and cooler kit also fits into that case
    Suggestion
    nothing

    Apr 16,2018

  • Dimitar
    Yes (1) Color: Black
    Antonov
    After 40 hours of research and testing over the past two years, we found that the 64GB Samsung EVO Plus is the best microSD card for most people’s needs. It’s the most versatile and cost-effective card we tested this year, with speedy random read and write speeds for phones or tablets plus fast sequential speeds for other uses.
    Suggestion
    After 40 hours of research and testing over the past two years, we found that the 64GB Samsung EVO Plus is the best microSD card for most people’s needs. It’s the most versatile and cost-effective card we tested this year, with speedy random read and write speeds for phones or tablets plus fast sequential speeds for other uses.

    Mar 02,2017

  • Raspi case
    Yes (1) Color: Black
    Simple but complete
    Its a simple pack with everything you need to build your little pc. Everything fits perfect and its not heavy. I have many other raspi cases but I would recommend buy this one from the beginning considering price/Quality.
    Suggestion
    I can't find where to connect the fan.

    May 19,2018

FAQ for Protective ABS Enclosure Case for Raspberry Pi 3

  • I've plugged my Raspberry Pi in, but nothing is appearing on the screen. What's wrong?

    It is important that you connect your cables in the correct order, ensuring that the HDMI cable is plugged in before the power.
  • Only the red light on my Pi is on! Is it broken?

    1. Check that your SD card is inserted correctly into your Raspberry Pi.

    2. Check that your SD card contains the software required for the Raspberry Pi to boot.

  • Do I need another computer to use a Raspberry Pi?

    You don't need another computer to use a Raspberry Pi, as it's a computer in its own right. However, when you need to create new micro SD cards, you might need occasional access to another computer.
  • I've copied NOOBS to an SD card, but it gets stuck on the splash screen. What should I do?

    If NOOBS won't load once you have copied the files over, it may be that you have a corrupt SD card. If you've tried a different SD card and NOOBS still doesn't work, then you might want to try installing Raspbian directly.
  • I have a Raspberry Pi 3. Do I need a special power supply?

    For most uses, the original official power supply will be fine.
  • Why Raspberry Pi boot sequence failures?

    Unlike a PC, the Raspberry Pi does not have a BIOS, so without a working software image, it is stone-cold-dead. Without a working OS, and if the power supply works, the only thing guaranteed to happen is that the red power LED turns on. If an image at least starts to boot, then looking at the status LEDs and the HDMI monitor can provide some indication of where the boot process failed.
  • Rainbow screen, what can i do?

    The rainbow flash screen should only appear for about a second (good). If the boot process halts with the rainbow screen on the monitor (bad), there may be a power supply issue, or a kernel software problem.
  • Bad or missing SD card, what is the problem?

    Using a Raspberry Pi 2 as an example, if there is no activity on the monitor and if the red and green status LEDs stay lit and un-blinking after power up, the SD card may not be fully inserted, not detected properly, not flashed or not formatted correctly.
  • No WiFi networks found during discovery scan?

    The activity LED on the WiFi dongle provides minimal indication of WiFi activity. If No WiFi networks are found, and it is flashing normally, there is no WiFi reception. If not flashing at all, the power requirements of the WiFi dongle may be over 150 mA, too high for a Pi USB port, or over 300 mA on a Pi B+, 2, and later versions (unlikely).
  • Why local WiFi network not found?

    It may take one or two minutes to find all available WiFi networks. If the local network does not appear in the list, the WiFi portion of the local router may be down or disabled, reception may be bad, or the router may not be responding to WiFi discovery.
  • Can this item be shipped to my country?

    We can deliver orders to most countries. For a detailed explanation of each shipping method, destination and approximate delivery time, please check our posts:

    GearBest shipping methods

    20 things you need to know when shopping on GearBest

    Short guide on tracking fees and shipping insurance on GearBest

    GearBest shipping memo: save money on delivery by choosing the best option

  • View More

Customer Questions

  • All(2)
  • Product Information(2)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

Is it appropriate for raspberry 3 b plus?

By Maksim Nov-24/2018 19:28:50

A
Hello Maksim, Thanks for your inquiry.Yes it is compatible with raspberry 3 b plus.
Q

The heat sink comes with adhesive?

By Gabriel Jan-04/2017 18:45:52

A
Hi Gabriel,Thank you for your inquiry.Package Contents: 1 x ABS Case, 1 x Screwdriver, 2 x Heat SinkHave a nice day!   

2 Questions & Answers View All

Sponsored Products Related to This Item

Shipping

There are two key factors which will affect the time you receive your items.

1
Item processing time
After receiving your order,we require some time to test the product to ensure its quality.The exact processing time varies depending on the item.The average processing time is 3 working days.but this can also be affected by the item's stock status. For small quantity orders,the processing time is 1-3days while larger quantity orders may require 2-5days.
2
Shipping methods
China Warehouse:
Shipping Type Country or Region Arrive within 1-7 Days Arrive within 8-15 Days Arrive within 16-30 Days Arrive within 31-45 Days Average Time (Days)
Unregistered Air Mail or Registered Air Mail United States 0.52% 44.87% 49.88% 3.5% 18.13
Spain, United Kingdom, Italy, Germany, France & Portugal 5.18% 43.44% 48.34% 1.17% 15
Netherlands, Greece, Poland, Hungary, Slovakia, Czech Republic 2.96% 40.34% 52.54% 3.74% 18.66
Russia 0% 4.45% 84.41% 11.1% 28
Japan, Korea 0% 21.30% 68.80% 9.66% 17.75
Brazil 0% 0% 23.91% 72.09% 38.6
Turkey 0% 37.75% 59.05% 3.1% 20.33
Thailand, Singapore & Malaysia 0% 40.39% 56.12% 2.6% 16.2
Other countries 0.7% 38.79% 47.94% 8.56% 23.57
Priority Line United States 12.28% 79.05% 7.4% 0.52% 11.75
Spain, United Kingdom, Italy, Germany, France & Portugal 8.44% 66.56% 23.45% 0.45% 13.55
Russia 0% 3.48% 75.79% 20.04% 31
Brazil 2.21% 6% 61.29% 25.46% 30
Turkey 20.42% 77% 3% 0.08% 10
Australia 7.67% 86.60% 5.68% 0% 11
Korea 97.54% 1.57% 0.89% 0% 7
Japan 95.80% 2.09% 0% 0% 6.84
Thailand, Singapore & Malaysia 58.96% 41.04% 0% 0% 8.45
Other countries 22.33% 30.8% 27.62% 17.64% 18.65
Expedited Shipping ALL countries(EMS) 3.8% 46.8% 26% 15% 14.8
ALL countries(DHL) 65.8% 25.75% 3.86% 0.37% 6.72
GW Warehouse: Typically 3-5 days to the UK, 3-7 days to other European countries.
USA Warehouse: Generally, 3-7 days to a USA address.
ES Warehouse: Generally, 2-5 days to the Spain, 3-7 days to the Portugal.
Shipping from warehouse nearest to shipping address is faster. Additional charges may apply.
Note: This is a general guide and delays maybe caused force majeure, natural disasters, inclement weather, war, public holidays, and factors outside our control. Generally speaking, we offer free shipping for Protective ABS Enclosure Case for Raspberry Pi 3 to United States (US, USA), United Kingdom (UK, GB), Germany, Italy, France, Spain, Portugal, Poland, Brazil, Russia, Japan, Greece, Austria, Hungary, Slovakia, Czech Republic, Ireland, Lithuania, Israel, Denmark, Norway, Sweden, Canada, Australia, Netherlands, Korea, Turkey, Mexico, Ukraine, Romania, Columbia, Thailand, Singapore, Malaysia etc. Please choose the shipping methods for the final price.

Payment

Gearbest.com accepts PayPal,Credit Cards,Wire Transfer,Westem Union, YandexMoney,Webmoney,Boleto,OXXO and BKM as secure payment methods.

1
Paypal
The most convenient payment method in the world.
2
Wire transfer
For orders which exceed $1,500,please contact us at support@gearbest.com.
Note: please email us the order number,the amount transferred along with currency type,and the exact date of the wire transfer.
3
Western Union
Please contact us at support@gearbest.com for details.
Note: please email us the following information after you have paid via Westem Union:
· Control Number(10 digits)
· The exact amount sent along with the currency
· Name of sender.
· Address of sender
4
YandexMoney、 Webmoney
With YandexMoney and Webmoney, it is convenient and safe for you to pay via credit card、wallet or cash
5
Boleto
For Brazil customers, we accept Boleto: you only need to fill in the payment information, remember your Boleto Voucher information and pay it within 3 days at any Boleto stores.
6
OXXO
For Mexico customers, we accept OXXO: you can choose OXXO payment on our website, and then remember your OXXO Voucher information and pay it within 3 days at any OXXO stores.

Do you want to bulk buy ? Please submit your wholesale inquiry below. Please note we usually don’t offer free shipping on wholesale orders, but the wholesale price will be a big bargain.

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service