LDTR - WG0012 ABS Case Protective Box

- WHITE 202570901

Compatible with Raspberry Pi 2 Model B / B +
$3.05
  • FREE SHIPPING Ship between: Aug 23 - Aug 26, Estimated Shipping Time: business days goods.buiness_days_tip
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer
goods.clearance

Recommended Products for You

Customers Who Bought This Item Also Bought


LDTR - WG0012 ABS Case Protective Box
Main Features:
● Made of ABS plastic, durable
● With camera hole for Raspberry Pi 2 Model B / B +
● Support installing fan
● Used for the installation of building blocks on the shell
Please note: the board showed in the picture is not included in the package

Specification

General

Model: LDTR - WG0012
Mainly Compatible with: Raspberry Pi
Color: White

Weight and Size

Product weight: 0.033 kg
Package weight: 0.060 kg
Product Size(L x W x H): 9.00 x 6.00 x 2.50 cm / 3.54 x 2.36 x 0.98 inches
Package Size(L x W x H): 11.00 x 7.50 x 4.00 cm / 4.33 x 2.95 x 1.57 inches

Package Contents

Package Contents: 1 x ABS Case, 4 x Screw, 4 x Rubber Foot

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Guess you like

FAQ for LDTR - WG0012 ABS Case Protective Box

  • I've plugged my Raspberry Pi in, but nothing is appearing on the screen. What's wrong?

    It is important that you connect your cables in the correct order, ensuring that the HDMI cable is plugged in before the power.
  • Only the red light on my Pi is on! Is it broken?

    1. Check that your SD card is inserted correctly into your Raspberry Pi.

    2. Check that your SD card contains the software required for the Raspberry Pi to boot.

  • Do I need another computer to use a Raspberry Pi?

    You don't need another computer to use a Raspberry Pi, as it's a computer in its own right. However, when you need to create new micro SD cards, you might need occasional access to another computer.
  • I've copied NOOBS to an SD card, but it gets stuck on the splash screen. What should I do?

    If NOOBS won't load once you have copied the files over, it may be that you have a corrupt SD card. If you've tried a different SD card and NOOBS still doesn't work, then you might want to try installing Raspbian directly.
  • I have a Raspberry Pi 3. Do I need a special power supply?

    For most uses, the original official power supply will be fine.
  • Why Raspberry Pi boot sequence failures?

    Unlike a PC, the Raspberry Pi does not have a BIOS, so without a working software image, it is stone-cold-dead. Without a working OS, and if the power supply works, the only thing guaranteed to happen is that the red power LED turns on. If an image at least starts to boot, then looking at the status LEDs and the HDMI monitor can provide some indication of where the boot process failed.
  • Rainbow screen, what can i do?

    The rainbow flash screen should only appear for about a second (good). If the boot process halts with the rainbow screen on the monitor (bad), there may be a power supply issue, or a kernel software problem.
  • Bad or missing SD card, what is the problem?

    Using a Raspberry Pi 2 as an example, if there is no activity on the monitor and if the red and green status LEDs stay lit and un-blinking after power up, the SD card may not be fully inserted, not detected properly, not flashed or not formatted correctly.
  • No WiFi networks found during discovery scan?

    The activity LED on the WiFi dongle provides minimal indication of WiFi activity. If No WiFi networks are found, and it is flashing normally, there is no WiFi reception. If not flashing at all, the power requirements of the WiFi dongle may be over 150 mA, too high for a Pi USB port, or over 300 mA on a Pi B+, 2, and later versions (unlikely).
  • Why local WiFi network not found?

    It may take one or two minutes to find all available WiFi networks. If the local network does not appear in the list, the WiFi portion of the local router may be down or disabled, reception may be bad, or the router may not be responding to WiFi discovery.

Customer Qusetions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

0 Questions & Answers View All>

Sponsored Products Related to This Item

Customer Reviews

0
  • 0
  • 0
  • 0
  • 0
  • 0

Get GB Points! Be the FIRST to Write a Review!

Your Recently Viewed Items

See personalized recommendations

New customer? Start here