Waveshare Night Vision Camera Light Sense IR LED Board

- BLACK 205666601

$5.49
  • Additional Purchase Deal If Cart Subtotal exceeds , you can buy 1 Special Add-On for .Discounts automatically applied to shopping cart before checkout. View Promo
  • FREE SHIPPING Ship between: Jul 19 - Jul 22, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought


Waveshare Night Vision Camera Light Sense IR LED Board

Main Features:
● Compatible with any version of Raspberry Pi
● With infrared light
● You can adjust it based on the distance
Note:the board showed in the picture is not included in the package

Product Description:
-500M pixels
-OV5647 sensor chip

Camera Parameters:
-CCD size: 1/4 inch
-Aperture ( F ): 1.8
-Focal length ( focal length ): 3.6mm ( adjustable )
-Viewing angle ( diagonal ): 75.7 degree
-Sensor pixels: 1080P

4 Screw Holes:
-Be used in a fixed position
-Support external 3.3V power supply
-Support infrared lamp or fill light

Specification

General

Brand: Waveshare
Type: Night Vision Camera Light Sense IR LED Board

Weight and Size

Product weight: 0.008 kg
Package weight: 0.025 kg
Product Size(L x W x H): 2.70 x 2.00 x 1.50 cm / 1.06 x 0.79 x 0.59 inches
Package Size(L x W x H): 6.00 x 5.00 x 3.00 cm / 2.36 x 1.97 x 1.18 inches

Package Contents

Package Contents: 2 x Night Vision Camera Light Sense IR LED Board, 1 x Screw Pack

Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Guess you like

FAQ for Waveshare Night Vision Camera Light Sense IR LED Board

  • I've plugged my Raspberry Pi in, but nothing is appearing on the screen. What's wrong?

    It is important that you connect your cables in the correct order, ensuring that the HDMI cable is plugged in before the power.
  • Only the red light on my Pi is on! Is it broken?

    1. Check that your SD card is inserted correctly into your Raspberry Pi.

    2. Check that your SD card contains the software required for the Raspberry Pi to boot.

  • Do I need another computer to use a Raspberry Pi?

    You don't need another computer to use a Raspberry Pi, as it's a computer in its own right. However, when you need to create new micro SD cards, you might need occasional access to another computer.
  • I've copied NOOBS to an SD card, but it gets stuck on the splash screen. What should I do?

    If NOOBS won't load once you have copied the files over, it may be that you have a corrupt SD card. If you've tried a different SD card and NOOBS still doesn't work, then you might want to try installing Raspbian directly.
  • I have a Raspberry Pi 3. Do I need a special power supply?

    For most uses, the original official power supply will be fine.
  • Why Raspberry Pi boot sequence failures?

    Unlike a PC, the Raspberry Pi does not have a BIOS, so without a working software image, it is stone-cold-dead. Without a working OS, and if the power supply works, the only thing guaranteed to happen is that the red power LED turns on. If an image at least starts to boot, then looking at the status LEDs and the HDMI monitor can provide some indication of where the boot process failed.
  • Rainbow screen, what can i do?

    The rainbow flash screen should only appear for about a second (good). If the boot process halts with the rainbow screen on the monitor (bad), there may be a power supply issue, or a kernel software problem.
  • Bad or missing SD card, what is the problem?

    Using a Raspberry Pi 2 as an example, if there is no activity on the monitor and if the red and green status LEDs stay lit and un-blinking after power up, the SD card may not be fully inserted, not detected properly, not flashed or not formatted correctly.
  • No WiFi networks found during discovery scan?

    The activity LED on the WiFi dongle provides minimal indication of WiFi activity. If No WiFi networks are found, and it is flashing normally, there is no WiFi reception. If not flashing at all, the power requirements of the WiFi dongle may be over 150 mA, too high for a Pi USB port, or over 300 mA on a Pi B+, 2, and later versions (unlikely).
  • Why local WiFi network not found?

    It may take one or two minutes to find all available WiFi networks. If the local network does not appear in the list, the WiFi portion of the local router may be down or disabled, reception may be bad, or the router may not be responding to WiFi discovery.

Customer Questions & Answers

  • All(1)
  • Product Information(1)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

Do the cameras come mounted on the boards as shown in the picture? The following 2 statements on the web page contradict each other: 1. "Note: the board showed in the picture is not included in the package" 2. "Package Contents: 2 x Night Vision Camera Light Sense IR LED __Board__, 1 x Screw Pack"

By Geoff Jan-09/2017 07:14:00

A

Hello Geoff

Thank you for your inquiry.

Please refer to the image:https://support.gw-ec.com/upload/qa/2017/01/10/8fe2ff3f5195b22cc94634fbf2770ba4.png

Thank you, Let me know if you need any help.

Have a nice day!


Q

Do the cameras come mounted on the boards as shown in the picture? The following 2 statements on the web page contradict each other: 1. "Note: the board showed in the picture is not included in the package" 2. "Package Contents: 2 x Night Vision Camera Light Sense IR LED __Board__, 1 x Screw Pack"

By Geoff Jan-09/2017 07:14:00

A

Hello Geoff

Thank you for your inquiry.

Please refer to the image:https://support.gw-ec.com/upload/qa/2017/01/10/8fe2ff3f5195b22cc94634fbf2770ba4.png

Thank you, Let me know if you need any help.

Have a nice day!


1 Questions & Answers View All>

Customer Reviews

5 out of 5
  • 1
  • 0
  • 0
  • 0
  • 0
  • Fred
    Waveshare 500MP Night Vision Camera Light Sense IR LED Board
    Color:Black
    Pros:
    The Waveshare 500MP Night Vision Camera Light Sense IR LED Boards were received in anti-static packaging. Durable sensors complete with miniature nuts and bolts.
    Cons:
    None

    Apr 03,2018

    Was this review helpful?

Your Recently Viewed Items

See personalized recommendations

New customer? Start here