All
Product keywords
Please enter the email address account
3.5 inch Touch Screen Module with Shell
Share to:

3.5 inch Touch Screen Module with Shell

- Black
212316201

480 x 320 Pixel / for Raspberry Pi 3
20.86
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Dec 18 - Dec 20, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item
Clearance

Recommended for You

Customers also shopped for


Main Features:
- Support switching in Raspberry Pi 2 type B and Raspberry Pi type B / B + / A +
- Cooperate with mobile power, you can do DIY design anytime
- Support Raspbian System then your system could play multi-format videos, touch to control camera ( 17 kinds of camera models ) and operate system without mouse
- The shell is composed of nine acrylic panels with stylish look, effectively protecting Raspberry Pi
- 480 x 320 resolution, more clear display to provide convenient HMI
- The shell can combine 3.5 inch touch screen and Raspberry Pi mainboard as one, easy to carry out

Specification

General

Raspberry Pi Type: Led Display

Weight and Size

Product weight: 0.1140 kg
Package weight: 0.1610 kg
Product Size(L x W x H): 8.50 x 5.50 x 2.00 cm / 3.35 x 2.17 x 0.79 inches
Package Size(L x W x H): 18.00 x 12.00 x 4.00 cm / 7.09 x 4.72 x 1.57 inches

Package Contents

Package Contents: 1 x 3.5 inch Touch Screen, 1 x Shell (with a Part )

Suggested Products

Customer Reviews

4.5 out of 5
  • 3
  • 3
  • 0
  • 0
  • 0
See all 6 reviews Write a Review
  • Jo
    Yes (0) Color: Black
    Was hoping for something better
    The refresh rate of LCD is very poor. You can literally see lines being written out to the terminal. Couldn't make it work (yet) in graphics environment but maybe with just part of the screen updated at a time it would be less noticeable. Case is ok, takes some time to get layers in correct order. LCD fits well in it. It seems to be impossible to have dual output to hdmi and lcd.

    Jun 01,2019

  • Sir Kim
    Yes (0) Color: Black
    Kit Raspberry Pi 3
    Great price por something like this. The quality of the screen seems really nice and works fine with the pen for the touch screen.
    Needed to work diferentes ways to get everything inside the Shell, but it was becaue i tried to put a battery within the kit....wich i did.
    Had to try diferentes ways to make the screen show some image.
    Suggestion
    Really nothing that i can think

    Aug 06,2018

  • EXELENTE PRODUCTO
    Yes (4) Color: Black
    EXELENTE PRODUCTO
    EXELENTE PRODUCTO...................................................................................................................................................................
    Suggestion
    NESECITA DRIVERS

    Nov 13,2017

  • Xavier
    Yes (8) Color: Black
    Nice, difficult to find the right way to install, beware ribbon cable
    Nice product, great price.
    Installed on a Pi3 B, raspbian.
    Suggestion
    Some difficulties to make it works with a good calibration : the best way is to use https://github.com/goodtft/LCD-show (the LCD35-show) and it works on a first try.
    Beware of the connection between the screen and the screen's PCB the ribbon cable is weak and there is not a lot of space in the shell : mine was damaged during the installation, one connection was cutted and the touch feature was not available all the time... (protect it with a piece of tape)

    Nov 19,2017

  • Ls
    Yes (0) Color: Black
    Bien
    Buen tamaño y calidad
    Suggestion
    No instrucción para programarla

    Jun 12,2018

FAQ for 3.5 inch Touch Screen Module with Shell

  • I've plugged my Raspberry Pi in, but nothing is appearing on the screen. What's wrong?

    It is important that you connect your cables in the correct order, ensuring that the HDMI cable is plugged in before the power.
  • Only the red light on my Pi is on! Is it broken?

    1. Check that your SD card is inserted correctly into your Raspberry Pi.

    2. Check that your SD card contains the software required for the Raspberry Pi to boot.

  • Do I need another computer to use a Raspberry Pi?

    You don't need another computer to use a Raspberry Pi, as it's a computer in its own right. However, when you need to create new micro SD cards, you might need occasional access to another computer.
  • I've copied NOOBS to an SD card, but it gets stuck on the splash screen. What should I do?

    If NOOBS won't load once you have copied the files over, it may be that you have a corrupt SD card. If you've tried a different SD card and NOOBS still doesn't work, then you might want to try installing Raspbian directly.
  • I have a Raspberry Pi 3. Do I need a special power supply?

    For most uses, the original official power supply will be fine.
  • Why Raspberry Pi boot sequence failures?

    Unlike a PC, the Raspberry Pi does not have a BIOS, so without a working software image, it is stone-cold-dead. Without a working OS, and if the power supply works, the only thing guaranteed to happen is that the red power LED turns on. If an image at least starts to boot, then looking at the status LEDs and the HDMI monitor can provide some indication of where the boot process failed.
  • Rainbow screen, what can i do?

    The rainbow flash screen should only appear for about a second (good). If the boot process halts with the rainbow screen on the monitor (bad), there may be a power supply issue, or a kernel software problem.
  • Bad or missing SD card, what is the problem?

    Using a Raspberry Pi 2 as an example, if there is no activity on the monitor and if the red and green status LEDs stay lit and un-blinking after power up, the SD card may not be fully inserted, not detected properly, not flashed or not formatted correctly.
  • No WiFi networks found during discovery scan?

    The activity LED on the WiFi dongle provides minimal indication of WiFi activity. If No WiFi networks are found, and it is flashing normally, there is no WiFi reception. If not flashing at all, the power requirements of the WiFi dongle may be over 150 mA, too high for a Pi USB port, or over 300 mA on a Pi B+, 2, and later versions (unlikely).
  • Why local WiFi network not found?

    It may take one or two minutes to find all available WiFi networks. If the local network does not appear in the list, the WiFi portion of the local router may be down or disabled, reception may be bad, or the router may not be responding to WiFi discovery.
  • Can this item be shipped to my country?

    We can deliver orders to most countries. For a detailed explanation of each shipping method, destination and approximate delivery time, please check our posts:

    GearBest shipping methods

    20 things you need to know when shopping on GearBest

    Short guide on tracking fees and shipping insurance on GearBest

    GearBest shipping memo: save money on delivery by choosing the best option

  • View More

Customer Q&A

  • All(3)
  • Product Information(3)
  • Stock Status
  • Payment
  • About Shipping
  • Others
Q

Is it capacitive or resistive?

By Theo May-21/2018 17:35:05

A

Hello Theo,

It is capacitive.

Q

It this compatible with Pi 2 B v1.1?

By Theo May-21/2018 17:32:45

A

Hello Theo,

Yes, it is compatible with Pi 2 B v1.1.

Q

Tiene soporte con Raspberry 3 / 3B ?

By Daniel García Jun-29/2017 01:07:55

A

Hello Daniel,

No, it is for Raspberry Pi 3.


Let me know if you need any further assistance. 


Q

Is it capacitive or resistive?

By Theo May-21/2018 17:35:05

A

Hello Theo,

It is capacitive.

Q

It this compatible with Pi 2 B v1.1?

By Theo May-21/2018 17:32:45

A

Hello Theo,

Yes, it is compatible with Pi 2 B v1.1.

Q

Tiene soporte con Raspberry 3 / 3B ?

By Daniel García Jun-29/2017 01:07:55

A

Hello Daniel,

No, it is for Raspberry Pi 3.


Let me know if you need any further assistance. 


Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

Be the FIRST to Ask a question. Want G Points? Just Write a Review!

3 Questions & Answers View All

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service