SupTronics X1000 Expansion Board + GPIO Protection Module

- BLACK 209825401

for Raspberry Pi 3 Model B / 2B / B+
$25.56
  • Additional Purchase Deal If Cart Subtotal exceeds , you can buy 1 Special Add-On for .Discounts automatically applied to shopping cart before checkout. View Promo
  • FREE SHIPPING Ship between: Jul 19 - Jul 22, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
;   
Tax Info Price Protection Price Disclaimer
Clearance

Recommended Products for You

Customers Who Bought This Item Also Bought


Main Features:
● X1000 expansion board for Raspberry Pi 3 model B / 2B, X1000 GPIO protection board for Raspberry Pi 3 model B / 2B / B+
● Omnibearing protection of your Raspberry Pi GPIO
● Incredibly easy to access GPIO over DB37 connector
● Exchangeable GPIO reference board included
● Provides an easy way to make sure you are hooking up the wires correctly
● Access to Raspberry Pi Display and Camera FPC
● Easy DIY with Raspberry Pi
● Power supply: 5V DC + / - 5 percent
● Output ports: 1 x HDMI, 1 x DB37 connector, 1 x 3.5mm A / V jack

Specification

General

Brand: SupTronics
Model: X1000
Raspberry Pi Type: Expansion Board
Material: PCB

Connectivity

Ports: 3.5mm Audio
Connectors: HDMI

Electronic Components

Input Voltage: 5V

Power Batteries

Batteries Included: No

Weight and Size

Product weight: 0.1180 kg
Package weight: 0.1850 kg
Package Size(L x W x H): 15.00 x 10.00 x 5.00 cm / 5.91 x 3.94 x 1.97 inches

Package Contents

Package Contents: 1 x X1000 Expansion Board, 1 x GPIO Reference Board, 1 x HDMI Adapter, 1 x 3.5mm Plug Audio Video Cable ( 10cm ), 4 x Spacer M2.5 ( 20mm ), 8 x Screw M2.5 ( 6mm )

Guess you like

FAQ for SupTronics X1000 Expansion Board + GPIO Protection Module

  • I've plugged my Raspberry Pi in, but nothing is appearing on the screen. What's wrong?

    It is important that you connect your cables in the correct order, ensuring that the HDMI cable is plugged in before the power.
  • Only the red light on my Pi is on! Is it broken?

    1. Check that your SD card is inserted correctly into your Raspberry Pi.

    2. Check that your SD card contains the software required for the Raspberry Pi to boot.

  • Do I need another computer to use a Raspberry Pi?

    You don't need another computer to use a Raspberry Pi, as it's a computer in its own right. However, when you need to create new micro SD cards, you might need occasional access to another computer.
  • I've copied NOOBS to an SD card, but it gets stuck on the splash screen. What should I do?

    If NOOBS won't load once you have copied the files over, it may be that you have a corrupt SD card. If you've tried a different SD card and NOOBS still doesn't work, then you might want to try installing Raspbian directly.
  • I have a Raspberry Pi 3. Do I need a special power supply?

    For most uses, the original official power supply will be fine.
  • Why Raspberry Pi boot sequence failures?

    Unlike a PC, the Raspberry Pi does not have a BIOS, so without a working software image, it is stone-cold-dead. Without a working OS, and if the power supply works, the only thing guaranteed to happen is that the red power LED turns on. If an image at least starts to boot, then looking at the status LEDs and the HDMI monitor can provide some indication of where the boot process failed.
  • Rainbow screen, what can i do?

    The rainbow flash screen should only appear for about a second (good). If the boot process halts with the rainbow screen on the monitor (bad), there may be a power supply issue, or a kernel software problem.
  • Bad or missing SD card, what is the problem?

    Using a Raspberry Pi 2 as an example, if there is no activity on the monitor and if the red and green status LEDs stay lit and un-blinking after power up, the SD card may not be fully inserted, not detected properly, not flashed or not formatted correctly.
  • No WiFi networks found during discovery scan?

    The activity LED on the WiFi dongle provides minimal indication of WiFi activity. If No WiFi networks are found, and it is flashing normally, there is no WiFi reception. If not flashing at all, the power requirements of the WiFi dongle may be over 150 mA, too high for a Pi USB port, or over 300 mA on a Pi B+, 2, and later versions (unlikely).
  • Why local WiFi network not found?

    It may take one or two minutes to find all available WiFi networks. If the local network does not appear in the list, the WiFi portion of the local router may be down or disabled, reception may be bad, or the router may not be responding to WiFi discovery.

Customer Questions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

0 Questions & Answers View All>

Customer Reviews

0
  • 0
  • 0
  • 0
  • 0
  • 0

Get GB Points! Be the FIRST to Write a Review!

Your Recently Viewed Items

See personalized recommendations

New customer? Start here