Product keywords
Please enter the email address account
HESAI XR2206 Function Signal Generator DIY Kit Sine Triangle Square Wave 1HZ-1MHZ DDS with Manual
Share to:

HESAI XR2206 Function Signal Generator DIY Kit Sine Triangle Square Wave 1HZ-1MHZ DDS with Manual

- China XR2206

XR2206 Pulse Signal Generator Adjustable Frequency Module DIY Kit
4.89 $5.68 14% OFF
Save an extra for using the App

Scan the QR code to buy:

  • 1.Download our FREE app on Google play or App Store.
  • 2.Launch the app and scan the QR code to buy directly.

Follow the below steps:

  • 1.Sign in to
  • 2.Add product(s) marked with to your Cart.
  • 3.Open our app, and go to your Cart.
  • 4.Pay for your order for an immediate discount!
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Nov 27 - Dec 04, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free installments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer Repair Warranty Report Item

Recommended for You

Customers also shopped for

Main Features

With excellent performance chip function generator ICL8038, add a small amount of resistive and capacitive components, can produce sine, triangle and square wave, and the frequency of the signal, duty cycle, adjustable distortion sine wave.
Model: ICL8038
Input 12V DC
Frequency range 50-5KHz,

Requires a certain DIY ability, you need to weld the kit yourself!

ICL8038 pin functions:
1 foot, 12 foot: sine waveform adjusting terminal;
2 foot: sine wave output;
3 foot: triangle wave output;
4 foot, 5 foot: the frequency and duty cycle (or waveform asymmetry) adjustment;
6 foot: V +, the positive power supply;
7 foot: offset; 8 foot: frequency adjustment input terminal;
9 foot: square wave output.
This is an open collector output terminal, work should take a load resistor to the corresponding positive power supply terminal from the pin, to get a TTL-compatible square-wave output, the load resistance must be connected to + 5V power supply;
10 foot: timing capacitor terminal;
11 foot: V-, negative power supply terminal or the ground. Use positive and negative power supply, 11 feet to the negative supply, the output waveform are symmetrical with respect to 0V; use a single positive power supply, 11 feet grounded, the output waveform is unipolar, uniform voltage is + VCC / 2;
13 feet, 14 Feet: Empty foot.
The kits are designed for a frequency range is 50-5KHz, two bands with a switch S to switch, RP1 is the frequency adjustment, RP2 is the duty cycle adjustment, RP3 is a sine wave distortion adjustment. Circuit uses 12V single power supply, input from the X1; X2, X3 is a waveform output side, you can use oscilloscope to observe three output waveforms.

Package Included:
1 set function signal generator module electronic kit


Home DIY
Model Number
View More

Suggested Products

Customer Reviews

5 out of 5
  • 8
  • 0
  • 0
  • 0
  • 0
See all 8 reviews Write a Review
  • Muhammed ?ztürk
    Everything is included
    Pcb double-sided quality. Everything is included. Collected, everything works. Maximum frequency 1,2 mhz. At high frequency, the meander is better to look at the oscilloscope through the divider 1/10. Then the fronts are sharper without distortion. Short screws with nuts do not attach it, but center the board in the case. Large screws tighten the top and bottom of the box by self-tapping the thread at the bottom of the box.

    Aug 05,2019

  • Dibyajyoti Das
    it's okay product. Recommend it for the price
    All the frequency range and triangle or sin wave pins are working... The knobs for adjusting frequency are okay but knob for amplitude for some reason turns anti clockwise and not clockwise like the other two... Also the acrylic case is little bit strangely cut... Some screw holes didn't match but hot glue fixed it all ... But anyway it's okay product. Recommend it for the price.

    Aug 05,2019

  • Timo Raddatz
    XR2206 DIY
    Since the power unipolar output signal is unipolar, the signal is not suitable for use in repair, you need to modify the device keep in mind. Well, the rubble of signals at a large frequency, nowhere from this do not get.

    Aug 06,2019

  • Marie-Antoinette
    The seller is good
    The seller is good, sends quickly. Comes quickly. Forgot to put the screws, sad. Up to 1 mhz reaches but distortions begin already within 300-400 khertz. For the home lab will come down. It is necessary to modify a little, since the output signal is unipolar.

    Aug 03,2019

  • Michael Balke
    I recommend. Thank you! The product corresponds to the description. Packed in a soft package. In the complete set all except screws and nuts. Only received, not yet saved.

    Aug 06,2019

Sponsored Products Related to This Item

Your Recently Viewed Items

See personalized recommendations

New customer? Start here
Pre-sale Service