After two Years of using I can say it worth it!
I changed the linear Bearing to Igus-bearings and they were much more quiet and precise.
The Mainboard needs also cooling, because it was to hot (around 90°C says my therminal camera).
After after those two little changes it's my favorite printer.
I worked on several delta printer (I dont like any of them), Pusa i3 MK3 MM2 and Renkforce RF500.
The Prusa is better, for sure, but for the most prints I use this one. I had NO! Jamming issues and the first nozzle.
With some changes in the G-code it's possible to change the Filament for some Layers to get Mulicolor Prints and I really like the results (see the pictures).
I would buy it again, but change the bearings and put on the fan on the Mainboard right in the first place.

By the way the Manuall is not good because there were two and you had to check both in the same time.
That was a little confusing...

Got my printer 3 weeks ago and at first I had a problem but I got customer support to help me out and they are sending a new motherboard that I had trouble with. It's great to had support behind you when you have a problem. I had some kind of short that took out the motherboard. I have now got it running on an old board from another printer I have. I had to caniblize that printer untill my new boaed gets here. I like this printer due to it;s large print bed and tall z axis

DIY olması kurulumu zorlaştırsa da, fiyat performans açısından güzel bir seçenek. Ayrıca müthiş hızlı kargo için teşekkür ederim.
büyük baskı alanı avantajı var. fakat yatağı 68 derece santigrattan daha fazla ısınmıyor.
Although DIY makes installation difficult, price is a good option in terms of performance. Also thank you for the awesome fast shipping.
Have great printing area advantage. but his bed does not warm more than 68 degrees centigrade.

Das Fillament druckt sich bei mir bei einer Temperatur von 180-200°C am besten. Aber ich habe manchmal das Problem, dass das Fillament abbricht wenn ich nicht drucke und es im Drucker stecken lasse. Geringes Stringing mit standart Einstellungen. Manchmal löst es sich vom Druckbett ab. Im großen und ganzen ist es ein sehr gutes Fillament.

If you’re looking for a potentially good printer this is not a bad choice. Low price high build volume and with a few upgrades runs really well. Available in EU too, so no hefty surprise-taxes.

I did not use that color yet but the material, in General, it is so good .
Definitely recommending it. Goo for it

Its very quiet and fast 3d printer. Its my second printer. I have Anet A8 and Tronxy is better. Meybe i buy anodher that printer.

Thanks for fast delivery!!
It's good product for such a price.
But it's just as chinese quality and needs so many hands.

después de probarlo, prefiero el PLA, es más fácil de imprimir, de encontrar, huele mejor, consume menos energía... pero si quieres tener un acabado tratado con acetona (brillante) este material te lo pone fácil

it is an amazing 3d printer, loved it. Highly recommended.
fast shipping. Easy to assemble. 3 in one

O material chegou devidamente embalado e em perfeitas condições, o tracking number também me deixou satisfeito. A qualidade do filamento também satisfaz perfeitamente as necessidades.

livraison dans les temps,objet correspondant a la commande.bonne imprimante,montage très simple.
imprime le pla et abs avec une bonne adhérence au plateau chauffant.je recommande cette imprimante .

birkaç gün içinde kurulumu yaptım. kuracak arkadaşlara ilk baştaki parçalara iyi bakmalarını önerebilirim.
genel olarak beğendim

it's ok. a little bit transparently but it's ok. works great with my printer.

filament vraiment super, facile à imprimer, rendu très agréable aussi bien pour imprimer de objets tel que des verrines ou des vases, mais aussi pour faire de la lithophanie.

Bonne tenue sur le plateau sur l'alfawise U20 sans ajout supplémentaire d'aide
Temperature extrusion à 200°
Le gris est un gris tres clair et non pas fonce comme sur la photo

Bonne petite machine, achetée par nostalgie du Meccano. Nécessite quelques bricolage pour en améliorer le fonctionnement mais c'est ce que je recherchais !

Fisrt printings low cost, for now is satisfing my needs

fat delivery, good package, low cost , is good.

Is just look more to white plastic than tranparent

this order was fast, everything was there, good color, good quality. 5 star! at first, i was a little affraid to order online. but the package was solid :-)

Rápido y muy buen producto.
Fácil y laborioso montaje pero buen resultado