Product keywords
Please enter the email address account

Customer Reviews

4.55 out of 5
  • 62
  • 29
  • 1
  • 0
  • 3
Write a Review
  • David
    A Good, Inexpensive Filament: Not premium, but worth the price
    I ordered this filament with the TronXY X1 that I also bought on GearBest. I originally was using the free filament that came with the TronXY and was having the worst troubles in the world to get anything to stick or print well. I finally switched over to this roll and what a difference it made. Even though the free filament was also made by TronXY, this filament was a complete 180 from that and very good for the price. It is not anything near a Premium filament but it is perfectly fine for a daily filament to print prototypes and dial in your bed leveling and such.
    Can become somewhat brittle if left out in the open and not bagged up like filament should be

    May 15,2018

  • Zhane
    My First Choice Filament
    well what can i say this was my first choice probably not the greatest one iv'e made but was a great filament the only issue i found with it is it uses a lower temp then from the others i have gotten not long ago and it can become brittle after being left in open air . but that was something i had to learn about all filaments they all have different properties so the moisture in the air can affect them . but same with my Creality Ender 3 3D printer it all has it's learning curve but the community is very helpful

    Sep 30,2018

  • Waker
    Great !
    i'm new to 3d print and have been able to print perfect parts the first day !
    - really easy to print ( i have not tested other pla for the moment so ... )
    - transparent 'color' give beautifull light refraction effects
    - fast delivery
    - transparent may be good to spot every little problems on a test print ( see picture of my first print with tevo tornado )
    no cons for me

    Feb 10,2018

  • PlasmaKirill
    Nice filament
    Really good filament.
    print with 200 degrees.
    I order with a Ender-3 printer.
    Нить хорошая, печатал при 200 градусах на Ender 3. Качество хорошее.
    Упакована была в коробочку а внутри пакет запечатанный с антисиликоном.
    Только в начале около метра она вся кривоватая, а потом нормальная.
    Толщина нити везде в пределах.

    Nov 15,2018

    Great Price
    The Tronxy black is a great price. It has consistent sized filament which is good so it doesn't cause clogs or back ups in the bowden tube. I use this filament for my base for most of my prints. Shipping was very quick.

    Oct 18,2018

  • Erez
    Love the color and quality
    Love the color and quality, was never actually disappointed from TronXY filament, GREAT STUFF!
    As usual shipping and handling was fast.

    Aug 12,2018

  • Emanuel Bastos
    Tronxy Pla Skin Color
    I liked the fact that the color is very homogeneous, I also liked the adhesion between layers!
    In my ender 3 flows well at 215ª C.
    At first I had problems with the filament's adhesion to the bed, but I think it was my fault, i increase the temperature and it stick!
    It should provide a optimal print temperatude besides the recommended temperature range!

    Jul 25,2018

  • fondas
    very good
    Tough PLA, the perfect replacement for ABS. With an impact strength similar to Ultimaker ABS, this Tough PLA material is the ideal solution if you are looking for a reliable, strong material for technical prints at larger sizes

    Dec 26,2018

  • Erez
    Handling was a bit longer than expected, but its here and it is wonderful.

    spool is slightly changed than my older tronxy materials

    Apr 29,2018

  • Levente Istvan
    Cheap and good.
    Compared with Verbatim PLA, the finished material surface is glossy, not mat, but it looks nice. Cheaper with 20 % compared with professional materials, but it is good enough. I will recommend, even for professionals prints.

    Jan 02,2019